Cisco Nexus 6001 / N6001-16P-SSK9

Categories: , Tag:

Description

N6001-16P-SSK9

Product Overview

The Cisco Nexus 6001P (Figure 1) is a 1RU, 10- and 40- Gigabit Ethernet switch offering wire-speed performance for up to sixty-four 10 Gigabit Ethernet ports (using Quad Small Form‑Factor Pluggable [QSFP] breakout cables) for Ethernet and FCoE traffic, with an overall throughput of 1.28 terabits per second (Tbps). The Cisco Nexus 6001P offers 48 fixed 1/10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) ports and four 40 Gigabit Ethernet QSFP+ ports. Each 40 Gigabit Ethernet port can be split into four 10 Gigabit Ethernet ports using a QSFP+ breakout cable. The Cisco Nexus 6001P delivers low port-to-port latency of approximately 1 microsecond and low jitter independent of packet size using cut-through switching architecture and with features enabled.

Performance

Cisco Nexus 6001: Layer 2 and 3 hardware forwarding at 1.28 Tbps.
Support for up to 256,000 combined entries of MAC addresses and APR entries
Low-latency of approximately 1 microsecond using cut-through forwarding for predictable, consistent traffic latency regardless of packet size, traffic pattern, or features enabled on 40 and 10 Gigabit Ethernet interfaces.
25-MB buffer per 3x 40 Gigabit Ethernet QSFP interfaces
Line-rate traffic throughput on all ports.
Interfaces
Cisco Nexus 6001P: 48 fixed 1/10 Gigabit Ethernet SFP+ and 4 fixed 40 Gigabit Ethernet QSFP+ports, with 10 and 40 Gigabit Ethernet FCoE support on all respective ports.
Cisco Nexus 6001T: 48 fixed 1/10 Gigabit BASE-T and 4 fixed 40 Gigabit Ethernet QSFP+ ports, with 10 and 40 Gigabit Ethernet FCoE support on all respective ports.
40 Gigabit Ethernet ports can be converted to 10 Gigabit Ethernet interfaces through QSFP+breakout cable.
Fabric extension through the Cisco Nexus 2200.
Quality of Service (QoS)
Layer 2 IEEE 802.1p (class of service [CoS]) 8 unicast queues and 8 multicast queues per port.
Per-port QoS configuration.
CoS trust.
Port-based CoS assignment.
Modular QoS CLI (MQC) compliance: IPv4 and IPv6.
ACL-based QoS classification (Layers 2, 3, and 4).
Flexible TCAM Carving.
MAC/ARP Hardware Carving.
MQC CoS marking.
Per-port virtual output queuing.
CoS-based egress queuing.
Egress strict-priority queuing.
Egress port-based scheduling: Weighted Round-Robin (WRR).
Control Plan Policing (CoPP): IPv4 and IPv6.
High-Availability Features
ISSU for Layer 2.
Hot-swappable field-replaceable power supplies and fan modules.
N+1 and N+N power redundancy.
N:1 fan module redundancy.
N+1 fan module redundancy.

Reviews

There are no reviews yet.

Be the first to review “Cisco Nexus 6001 / N6001-16P-SSK9”

Your email address will not be published. Required fields are marked *